High-drain power in a classic inline layout for your custom 24V DIY battery packs.
This EVE 25P 6S 18650 Battery Pack is a pre-assembled bare cell configuration, featuring six genuine EVE 18650-25P high-drain cells arranged side-by-side in series (6S1P) with spot-welded nickel tabs. It delivers a nominal 22.2V voltage (25.2V full charge) and a 2500mAh capacity, with a powerful 30A continuous discharge (12C) capability.
The linear layout makes this pack suitable for long battery compartments, commonly found in 24V industrial equipment, custom power tools, and high-power LED lighting projects. If the pre-welded nickel tabs do not perfectly match your BMS or wiring diagram, we offer custom tab welding—simply contact us with your specific requirements before ordering.
IMPORTANT: This is a BARE CELL PACK.
-
No BMS (Protection Board) is included.
-
No wires or connectors are attached.
-
You must have the skills to solder your own connections and install an external 6S BMS before use. Never use or charge this pack without proper protection.
Key Features
Genuine EVE 25P Cells: Authentic high-drain 18650 cells, rated for high-current applications.
30A Continuous Discharge (12C): Delivers explosive power for demanding DIY projects, power tools, and custom equipment.
Inline 6-Cell Layout: Space-saving linear design, ideal for long, narrow battery compartments.
Pre-welded Nickel Tabs: Comes with pure nickel strips spot-welded to the terminals, ready for you to solder your wires or build a battery pack.
Custom Tab Options: Nickel tab positions may vary; we can customize the welding layout based on your wiring diagram.
Parameters
*Dimensions are approximate. Please allow ±1-2mm tolerance.
Applications
Recommended For:
DIY 24V Battery Packs: For building custom 22.2V/25.2V power packs for industrial equipment, robotics, and portable devices.
Custom Power Tools: Rebuilding or building 24V tool battery packs (requires 6S BMS and proper wiring).
High-Power LED Lighting: Suitable for 24V LED strips and work lights (with appropriate BMS).
Custom High-Drain Projects: Spot welders, portable jump starters, or any project demanding 30A bursts.
Not Recommended For:
Beginners or Plug-and-Play Users: If you cannot spot-weld, solder, and install a BMS, do not buy this product.
Devices Requiring a Finished Pack: This will not fit directly into standard battery compartments without custom wiring.
Vaping (Unprotected): Using bare, unprotected cells in mechanical mods is extremely dangerous and not recommended.
FAQ
Q1: Does this battery have a protection board (BMS)?
A: No. This is a bare cell pack. You must install an external 6S BMS to protect against overcharge, over-discharge, and short circuits.
Q2: Does it come with wires?
A: No. It only includes spot-welded nickel tabs. You will need to solder your own wires or spot-weld your connections.
Q3: Can I customize the nickel tab positions?
A: Yes. The image notes that tab positions may vary. We can weld the tabs according to your specific wiring diagram. Please contact us with your layout requirements before ordering.
Q4: What is the actual discharge current?
A: The EVE 25P cells are rated for a continuous discharge of 30A (12C). However, the actual current you can draw will depend entirely on the BMS and wiring you install.
Q5: What are the dimensions?
A: The six cells are arranged inline, measuring approximately 110mm (Length) x 65mm (Height) x 18.4mm (Depth).
