Safe 12.8V power in a compact square layout for your 12V devices and DIY projects.
This 32700 LiFePO4 (Lithium Iron Phosphate) Battery Pack features four large-format cells arranged in a 2x2 square series (4S1P) configuration. It delivers a stable 12.8V nominal voltage (14.6V full charge) and a 5000mAh capacity.
Unlike standard 3.7V Li-ion cells, LiFePO4 chemistry offers superior thermal stability, an ultra-long cycle life, and a much lower risk of fire or explosion. The 32700 form factor (approx. 32mm diameter per cell) is ideal for replacing standard 12V lead-acid batteries, powering 12V solar lights, portable devices, and custom 12V projects. The 2x2 square layout provides a more compact footprint (66x66mm) for tighter enclosures. It comes fully assembled with a built-in protection board (BMS) and pre-wired with red (positive) and black (negative) leads. Note: The wire ends are bare (no connector attached).
CRITICAL WARNING: Voltage Compatibility
This is a 4S LiFePO4 battery (12.8V nominal). You MUST use a dedicated LiFePO4 charger with a 14.6V cutoff. Never use a standard 4S Li-ion charger (16.8V) or a single-cell charger, as it will overcharge the battery and cause permanent damage or fire.
Key Features
LiFePO4 Chemistry: High thermal stability, excellent safety, and an ultra-long cycle life.
4S Configuration (12.8V): The standard 12V LiFePO4 platform, ideal for replacing lead-acid batteries and powering 12V devices.
Compact 2x2 Square Layout: Space-saving design (approx. 66mm x 66mm x 72mm) ideal for tight enclosures where a long pack won't fit.
Built-in Protection Board (BMS): Protects against overcharge, over-discharge, over-current, and short circuits.
Pre-wired Leads: Comes with red (+) and black (-) wires. No connector is attached (bare wire ends).
Parameters
*Dimensions are approximate and include the protection board and heat shrink wrap. Please allow ±1-2mm tolerance.
Applications
Recommended For:
12V Solar Lights: The ideal replacement battery for outdoor solar path lights and lawn lamps.
12V Devices: Perfect replacement for devices using 12V lead-acid batteries or 12V power sources.
DIY 12.8V Projects: Custom electronics requiring a stable 12V-12.8V power source in tight spaces.
Emergency Lighting: Reliable, safe power for 12V emergency lamps.
Not Recommended For:
Devices Requiring 14.8V/16.8V: This battery will not work properly in standard 4S Li-ion devices due to the lower voltage.
High-Drain Power Tools: Not suitable for tools requiring high burst currents.
Standard Li-ion Chargers: Never charge this with a 16.8V or 4.2V charger.
FAQ
Q1: Can I use my standard 4S Li-ion charger (16.8V) for this battery?
A: NO. You must use a dedicated LiFePO4 charger with a 14.6V cutoff. Using a 16.8V charger will overcharge and damage the battery, potentially causing a fire.
Q2: Why is the voltage 12.8V? I thought 4S was 14.8V.
A: This is a LiFePO4 battery, not a standard Li-ion battery. LiFePO4 cells have a nominal voltage of 3.2V (3.2V x 4 = 12.8V), with a max charge of 14.6V. Standard Li-ion is 3.7V/4.2V.
Q3: How does the square layout help?
A: The 2x2 square arrangement creates a more compact footprint (approx. 66x66mm), making it ideal for battery compartments that cannot accommodate a long, straight 4-cell pack.
Q4: Can I use this to replace a 12V lead-acid battery?
A: Yes, it is an excellent, lighter, and longer-lasting replacement for 12V lead-acid batteries, provided your device's charging system is compatible with LiFePO4 (14.6V cutoff).
Q5: How should I connect the wires?
A: The red wire is positive (+) and the black wire is negative (-). Ensure correct polarity when connecting to your device.
